Home Products Rentals About Us News Links Contact Us  

Quicklinks
Seabotix LBV
LBV Details
150 Meter
300 Meter
1500 Meter
3000 Meter
Controller
Power Supply
Accessories
Remotely Operated Vehicles
ROVs
Crawlers
Accessories
Nuclear and Hazardous Environments
Homeland Security
Harbor and Seafloor Survey Equipment
Equipment For In-shore & Off-shore
Related Products
ROV's Remotely Operated Vehicles
Chemical Analysis Equipment
Cameras
Lights
Manipulators
Sonar
Pipe Crawlers
Digital Recording
Connectors

Contact

Roper Resources Ltd.
984 St. Patrick Street
Victoria, BC, Canada, V8S 4X5

Canadian Sales: (250) 361-9115
USA Sales: (805) 798-0277
Fax: (250) 361-9115
email:
Chris@RoperResources.com

Proud Member Of
Proud member of ADC International

We Accept VisaWe Accept MasterCard

 

Thrusters
ThrusterOne of the many impressive features of the LBV are the thrusters. Considerable engineering and testing was put into the thruster design creating a powerful and efficient design.

Fitted to each LBV vehicle are four (4) of thrusters. Port forward, starboard forward, vertical and lateral configurations allow movement on all axis. Each thruster is the same allowing for a single spare to be carried. Additionally, each thruster is isolated in the event of flooding keeping the other thrusters and main housing from flooding also.

For efficiency and safety the propeller is enclosed in a Kort nozzle. The Kort nozzle is constructed from high strength glass filled nylon and provides an efficiency gain of more than 40%. A two (2) bladed propeller designed for efficiency in both directions is fitted to the stainless steel motor shaft.

Standard Thruster

The standard thruster is driven by a BRUSHED DC motor and has a Bollard thrust of 2.3kgf - 5.1lbs.

Specifications - SBT150
Depth Rating:
150 meter - 500 feet
Length: 6.8 inches - 173 mm with nozzle
Width: 3.7 inches - 95 mm with nozzle
Height: 3.5 inches - 90 mm with nozzle
Weight in air: 1.5 pounds - 700 g with nozzle
Propeller: 3 inch - 76 mm, 2 blade
Bollard Thrust: 2.3kgf - 5.1lbs
Nozzle: Kort type 37, glass filled nylon
Housing: Hard anodized aluminum
Shaft Seal: Double O-ring with grease gallery
Power Requirement: 80 Watts
Safety: Isolated, leak detection and current limiter


Higher Performance Brushless DC Thrusters

Standard on the deeper systems and optional on the LBV150 are super high performance thrusters. Utilizing the same outer configuration the internal motor is a BRUSHLESS DC. This allows for higher output creating 3.25kgf - 7.2lbs of Bollard thrust. Greater advances are the reduction in maintenance since there are no brushes and the housing is oil compensated.

Specifications - HPDC150
Depth Rating:
3000 meters
Length: 6.8 inches - 173 mm with nozzle
Width: 3.7 inches - 95 mm with nozzle
Height: 3.5 inches - 90 mm with nozzle
Weight in air: 1.57 pounds - 710 g with nozzle
Propeller: 3 inch - 76 mm, 2 blade
Bollard Thrust: 3.25kgf - 7.2lbs
Nozzle: Kort type 37, glass filled nylon
Housing: Hard anodized aluminum
Shaft Seal: Double O-ring with grease gallery
Power Requirement: 150 Watts
Safety: Isolated, leak detection and current limiter