Sidus Solutions' SS109 underwater pan and tilt assembly is a robotic positioning device which improves the versatility and reliability of video inspection systems. The dependability and ease of maintenance of this robust pan and tilt are achieved through the integration of reversible synchronous motors, extremely low backlash harmonic drives and precision ball bearings into an unique modular motor assembly. These unitized motor modules develop an impressive ten foot pounds of torque and are securely locked into the corrosion resistant one-piece underwater housing.
The distinctive modular design, found only in the SS109 assembly, simplifies field repair to using only small hand tools. No soldering is required and can be customer serviced if necessary. In addition to the standard 120 volt and 24 volt AC configurations, additional versions include 24 volt DC utilizing stepper motors, are also available. Modifications can be made to include feedback circuits and limit switches for applications where position information is vital.
Specifications
Dimensions: |
Height 8.2 in. / 208.3 mm
Width 6.6 in. / 167.6 mm
Depth 3.3 in. / 81.3 mm |
Weight: |
9.3 pounds / 4.22 kilograms (in air)
5.9 pounds / 2.68 kilograms (in water) |
Housing: |
Hard anodized aluminum
Titanium housing available |
Connector: |
LPMBH-5-MP |
Operating Depth: |
100 feet / 30.48 meters (air filled)
10,000 feet / 3,048 meters (oil filled) |
Power: |
120 VAC and 24 VAC standard |
Torque: |
10 foot pounds / 13.6 NM (each axis) |
Rotational Speed: |
4.9 degrees per second |
Gear Backlash: |
36 arc minutes |
Scan Range: |
360 degrees both axis
180 degrees tilt axis with yoke |
Need more technical or cost information? Please contact Chris@RoperResources.com
Contact 
