Roper Resources Ltd.
984 St. Patrick Street
Victoria, BC, Canada, V8S 4X5
Canadian Sales: (250) 361-9115
USA Sales: (805) 798-0277
Fax: (250) 361-9115
email:Chris@RoperResources.com
Proud
Member Of
|
 
|
|
|
|
|
LBV is an underwater vehicle like no other.
With it's compact size, rugged design, capable features and affordable
price it is the perfect tool for any underwater application. |
|
|
This new generation SEAMOR has been developed
as a light duty work- class ROV. While maintaining many of the outstanding
physical and operational characteristics of the original SEAMOR, this vehicle
is capable of operating in ocean depths to 300m/1000 ft. |
|
|
The Seaeye Falcon incorporates
many of the features that have proved so successful in other Seaeye ROVs
but with a number of technical innovations never before seen in a lower
cost ROV. The Seaeye Falcon sets a new standard for inshore and coastal
operations to 300 metres depth |
|
|
THE SEAEYE
TIGER is widely regarded internationally as the standard observation and
inspection ROV for operations to depths of 1000 metres in the offshore
oil and gas industry. Its performance in strong currents, excellent handling
and maneuverability are unsurpassed. A Seaeye Tiger can be operated free
swimming with up to 450 metres of umbilical or from a Type 2 or Type 5
TMS system to its full working depth.
|
|
|
|
The GAVIA autonomous underwater vehicle (AUV)
is a fully modular, small torpedo shaped vehicle capable of diving down
to 2000 metres with long endurance underwater. |
|
|
|
These tracked units are precision machined
from solid brass, aluminum or stainless steel stock and are fitted with
high quality, powerful DC drive motors and vulcanized rubber track belts.
Each unit is completely independent of the other, providing the system
with excellent steering and maneuvering capabilities. |
|
|
Microtracs units can be operated individually
or as multiple units. Individually powered units and can be easily fitted
to a variety of equipment platforms to suit a wide range of applications
including video inspection, pipe examination, duct inspection, cleaning
and more. |
|
|
By design, Inuktun's MiniTracs units are small
and rugged, providing the user with access to confined spaces and harsh
environments. MiniTracs units can be operated individually or as multiple
units. Each unit is individually powered and can be easily fitted to a
variety of equipment platforms to suit a wide range of applications. |
|
|
The VersaTrax 150 is a modular, long range
internal pipe inspection system capable of operation within a variety of
pipe sizes from a minimum internal diameter of 15cm/6 inches. Extremely
powerful, this system is able to penetrate up to 450 m/1500 ft of pipe
and overcome obstacles and offset joints. |
|
|
The IPN pipe examination system was a joint
project of NDT Design, Sonic Sensors and Inuktun Services Ltd, and was
built for Pacific Gas & Electric. The vehicle was designed to operate
in 22 inch natural gas pipe and perform non-destructive examinations of
the welds. |
|
|
The
next generation of the VGTV will satisfy customers
who need a versatile and portable inspection equipment
that can do its work on rough ground, in poor visibility
or extreme temperatures, and underwater to depths
of 10 meters. |
|
|
|
Made from molded polyurethane and aluminum,
and using ballast consisting of standard diver belt weights (readily available
at dive centers) the Imagenex Digital Dual Side Scan Sonar Model SportsScan
is capable of operating at ranges of 120M and depths of up to 30M (100ft). |
|
|
Now with Multi-frequency Sonar, operators can
generate highly
detailed full-scale images with just one
unit. The 881A is a programmable
multi-frequency digital imaging sonar
that you can operate using default
frequency settings or customize the
configurations for your own situation.
High performance, lower cost, low
power and simple set-up and
installation, make this sonar perfect for
the largest ROV’s to the smallest
inspection ROV’s, plus AUV or UUV
applications. |
|
|
The
Model 881A Azimuth Drive is a rugged and powerful rotary actuator drive
that can
be coupled to an Imagenex Model 881A Profiling
Sonar. The two axes of rotation in this combined
unit provide the capability to obtain accurate, high
resolution range information in any direction. |
|
|
The
Imagenex Model 881A Echo Sounder is a completely self contained echo sounder
with a serial output. It is mounted in a pressure proof housing with an
underwater connector for use in depths up to 3000 meters (10000 feet).
It can be used as a standard echo sounder or with digitized first returns
only. |
|
|
Now
with
Multi-frequency
Sonar, operators
can fine-tune their
profiling range
resolution. The
Model 881A
Profiling Sonar
Head is a
programmable
multi-frequency digital scanning sonar that you can operate using default
settings or customize
the configurations for your own situation. |
|
|
The DF-1030 is a compact, lightweight, high-resolution
underwater unit that uses ΔF
technology incorporating CTFM (Continuous Transmission Frequency Modulation).
The Sub-
Bottom Profiler includes a standard RS-485 serial interface, transmitter,
high performance, low
frequency transducer, and an ultra low noise receiver circuit, which gives
Imagenex sonar units
their superior performance. |
|
|
The
Model 852 Digital Imaging Sonar was designed for use with the smallest
of ROV’s. For maximum flexibility, this is a design with a fluid
filled front end and a pressure housing for the electronics. The unit requires
approximately 2.5 Watts from 24 VDC, or optional 48 VDC. Serial communication
is utilized, RS-485 or RS-232 at 115.2 kbps. This unit will scan a maximum
of 360° with a maximum range of 50 meters. The total weight in water
is less than 0.2 kg (0.4 lbs). |
|
|
|
The Hydraulic Pan & Tilt performs flawlessly
in deep ocean environments and in land applications where high speed and
high torque motions are required. The Hydraulic Pan & Tilt is available
in three models: 36-9 (360º pan, 90º tilt), 36-12 (360º pan,
120º tilt) and 36-18 (360º pan, 180º tilt). |
|
|
|
40 years of design
and manufacture for the Offshore Underwater Diving Industries are behind every product made at BIRNS.
To the left is the Snooperwide light. |
|
|
Nuytco Research Limited's NEWTLITE 200W is
equipped standard with a 200W HMI osram hot-restrikable lamp. The HMI lamp
delivers abundant light at 5600 degrees K for maximum color resolution. |
|
|
|
he Bowtech BP-CVIS
II, Compact Video Inspection System is a portable control station for operation,
viewing and recording of colour or monochrome video cameras together with
audio input and intensity control of a lamp. |
Click Here
For More Information
|
The
Bowtech BP-DVIS-2, Diver Video Inspection Systems is the second edition
of this system. The improved system is now smaller and therefore more
portable The control station is for the operation, viewing and recording
of underwater colour or monochrome video cameras together with intensity
control of underwater lamp. The control station is housed in a marine
grade transport container manufactured from high quality splash proof
material.
|
Click Here
For More Information
|
The entire line of S-series
Tuffcam cameras was developed to maximize the overall utility and functionality
of small, tough video cameras. An innovative new manufacturing approach
from SVS, which breaks from the traditional method of housing a delicate
camera within an elaborate box or shell, instead produces nearly indestructible,
molded cameras that fit in the palm of your hand.
|
Click Here For More Information
|
Roper Resources Ltd. offers a range of different camera models, from hand held units
to helmut mounted ones. Displayed is a Tuffcam on a Kirby Morgan 27 Helmut.
|
|
|
The Spectrum 60 PT is
an extremely small, robust, remotely operated pan and tilt camera manufactured
using lightweight corrosion resistant materials. This remarkable high performance
camera is unique due to its ultra-miniature size and precision design. |
|
|
The Spectrum 90 PTZ high
resolution color cameras are compact and powerful providing the perfect
solution to a wide range of inspection challenges unique to every industry. |
|
|
The low cost Crystal
Cam Camera designed and developed by Inuktun is a unique, high performance
micro drop video camera
that is compact, lightweight and easily affordable. The camera head is
completely encased in transparent epoxy giving it a rugged quality and
the ability to operate to a depth of 300 m / 1000 ft. |
|
|
|
|
The Deepwork Hydraulic Cutoff Saw offers an
effective and efficient method for remote, underwater cutting. Standard
abrasive disk cutters are difficult to operate remotely due to the problem
of regulating cutting pressure. The Deepwork Cutoff saw solves this problem
by mechanically regulating the pressure applied to the cutting disk, relieving
the operator of force management. |
|
|
